Electrodynamic shakers
Vibration fatigue can damage the product and lead to part breakage. The 6NAPSE Group tests their vibration reliability thanks to its electrodynamic shakers.
Vibration tests in Test center
The 6NAPSE Group Test Center performs vibration tests for the characterization or qualification of products according to specifications or standards (ISO 16750-3: 2012, IEC 61373, IEC 60068, DO-160, MIL-STD, UN 38.3, etc.).
The 6NAPSE Group is a major player in battery testing. It has the ability to carry out vibration tests coupled with climatic conditions on batteries up to 3m wide and 2 tons.
Any vibration test requires specific or universal tools. The 6NAPSE Group has a design office for the sizing, design, production and simulation of these tools. Several operating modes are possible: either the tools belong to the manufacturer at the end of the project, or a 6NAPSE tool is adapted to correspond to the desired environment.
Our shakers: power range
22kN
LDS V850
36kN
LDS V875LS – Table RT750
45kN
IMV A45 – Table RT900
60kN
LDS V8 – Table HBT600
(ISO8 cleanliness class under laminar flow enclosure)
74kN
IMV A74 – Table VST900
IMV A74 – Table RT900
89kN
LDS V964 – Table HBT600 (ISO8 cleanliness class under laminar flow enclosure)
125kN
IMV K125LS – Table RT1500
We carry out vibration tests in climatic and humidity conditions, over a range [-70; +180]°C.
We also have the possibility of evolving in a controlled atmosphere allowing tests in a grey/white room according to the specifications of the aerospace industry (ISO8 cleanliness class).
In addition, we have a service dedicated to the maintenance of shakers.
Vibration tests in controlled environments
Cleanliness class area
Our shakers are under laminar flow enclosure, allowing us to test in cleanliness class ISO 8 according to the specifications of the aerospace industry (with lock to change, blouses, charlottes,...). In the ISO 8 area, there are dedicated tools, dedicated sensors and cleaning equipment (isopropyl alcohol).
Remote climate chamber 🌡
We carry out vibration tests under climatic and humidity conditions by equipping our vibrators with a remote climatic chamber. The 6NAPSE Group has 2 remote climatic chambers and 3 modular air generators.
Temperatures: -70°C +180°C
Humidity: control up to 95% RH
Cooling for hydraulic circuit ❄
Our vibration tests can be carried out under climatic conditions with a cooling circuit different from the oven. We reproduce the environment in series life and in operation (with a water/glycol mixture up to 90°C or synthetic oils/silicone up to 200°C). The 6NAPSE Group has 3 cooling benches.
Operating temperatures: -50°C +200°C
The 6NAPSE Group is called upon by a large number of industrial sectors to carry out tests on vibrating pots (Aerospace, Military, Automotive, Railway, etc.).
Contact us to discuss your needs quickly and technically!