Tensile testing
The 6NAPSE Group guarantees the tensile strength capacity of a part or assembly through laboratory tests.
Some objects or products must be able to support loads, weights and other types of efforts. Thus, a minimum level of strength and resistance to stress is required. To measure this mechanical resistance capacity, the 6NAPSE Group offers tensile tests.
Tensile testing
A tensile test is a physical and mechanical testing method. It gives the mechanical characteristics of a material: elastic behavior, plastic behavior and breaking strength.
Among its mechanical durability tests (fatigue, endurance), the 6NAPSE Group offers tensile tests.
Furthermore, like any mechanical test, the tensile test reproduces a simple stress, to simulate the forces and stresses in real conditions.
Applications
- Compression / tensile tests on porous materials
- Compression / tensile tests on polymers
- Tests on trailing arms or metal supports
Tensile testing gives several important values:
- Young’s modulus
- Elasticity limit
- Tensile strength / ultimate limit
- Elongation at break
- Poisson coefficient
These values are going to be essential for the following axes:
- Quality Control
- Basis of calculation and dimensioning of elements under stress
- Characterization of the transformation behavior of materials
- Choice of materials (comparison of characteristics)
The 6NAPSE Group conducts other Mechanical Reliability Tests: compression tests, torsion tests and rotation tests.
Any part/system subject to repeated mechanical stress
From the single part to the complete system
Additional expertise
- Fatigue and mechanical endurance tests
- Drop Test
- Vibration tests (low and high frequencies)
- Multi-physics test (mechanical, thermal, electrical)
- Validation plan
- CAD design and 3D model: virtual prototyping
- Simulation: application of constraints by virtual tests
- Analysis of the origin of the failure: surface and core characterization of the material, identification of the cause of the defect (breakage, rupture, appearance defect, alteration, corrosion)
6NAPSE Group assets
- Carrying out all types of tests according to the physics required via cylinders (custom bench design)
- Reproduction of complex movements with a robot arm for speed of execution and easier installation
- Capacity in ambient or climatic environment
- Expertise of the breakage phenomenon in the laboratory
- Great expertise in the mechanical field
- ISO 9001 certified
OUR TECHNICAL MEANS
CYLINDERS
ROBOT ARM
CAD SOFTWARES
Contact us to discuss your needs quickly and technically!