Select Page

Corrosion testing – salt spray test

essais corrosion au brouillard salin

The 6NAPSE Group conducts salt spray corrosion tests. The laboratory checks the durability of the product in a saline atmosphere.

Products can be placed in an aggressive saline or corrosive atmosphere during their lifetime (seaside, industrial environment, polluted environment).
This environment can degrade the product and cause premature failure. It is therefore essential to detect these degradations and their time of appearance to guarantee the durability of the materials.

 

The salt spray test (or salt fog test) is a standardized and popular corrosion test method, used to check corrosion resistance of materials and surface coatings. Salt spray testing is an accelerated corrosion test that produces a corrosive attack to coated samples in order to evaluate (mostly comparatively) the suitability of the coating for use as a protective finish (source : wikipédia).

Corrosion testing

The 6NAPSE Group performs neutral salt (NSS) or acetic (AASS) fog tests in the laboratory. These tests are used to check the corrosion resistance of an assembly or sub-assembly in order to:

  • Determine areas susceptible to corrosion
  • Checking the effectiveness of a protective paint
  • Qualify the choice of a surface treatment
  • Compare the performance of parts from different suppliers
  • Study the evolution of a corrosion phenomenon

The 6NAPSE Group has around 10 salt spray chambers (cycled or not). He carries out tests with neutral salt spray (NSS) or acetic spray (AASS) in the laboratory: studies of corrosion phenomena, sensitivity to oxidation in a corrosive atmosphere.

Standards

NF EN ISO 9227 (DIN 50 021) NSS, AASS, CASS test NF EN 60068-2-11 ; ASTM B117 ; NF EN ISO 60068-2-52 ; ASTM G85 ; PV1208 (SWAAT) ; Volvo VCS 1027_1449, Volvo 423- 0014 ; Ford_CETP00.00-L-467 ; RENAULT ECC1 (D172028) ; VW PV1210 ; PSA D13 5486, PSA and Renault D17 1058 ; DIN EN ISO 6270-2 (DIN 50017) ; VDA-Test-621-415 ; EN_ISO_11997- 1 cycle B, VDA621-415 ; Nissan M0158 CCT-I, CCT-IV, GMW 14872 ; MIL STD 202F Method 101E4 ; ISO 16701 ; Scania STD4319

Analyses et Surface laboratory has COFRAC testing accreditation (Accreditation n°1-1720 - scope available on www.cofrac.fr) for neutral salt spray corrosion tests according to NF EN ISO 9227 and NF EN standards 60068-2-11.

test corrosion brouillard salin

Cycles

The 6NAPSE Group can carry out these cycling tests to check the product’s resistance to various conditions:

  • Neutral Salt Spray (NSS)
  • Acetic Salt Spray (AASS)
  • Forced drying (or forced convection)
  • Humidification (Temperature/Humidity)
  • Dry air
  • Rinsing
  • Water spray

Associated services

  • Corrosion analysis and expertise
  • Observations (photos and light cabin)
  • Characterization (optical microscopy, colorimetry, gloss, etc.)
  • Resistance of paints (scratches, abrasion, checkering, Scratch Test, adhesion, etc.)
  • Validation plans (automotive, rail, aeronautics, transport, packaging, etc.).

6NAPSE Group assets

  • All the controls, tests and analyzes of our laboratories are carried out in compliance with the quality criteria of our industrial customers.
  • Short standard deadlines and possibilities of urgent care
  • Complete validation plan (support for all tests of a standard)

Contact us to discuss your needs quickly and technically!