Climatic chambers testing: temperature and humidity
The 6NAPSE Group carries out climatic tests according to specifications or standards in force in order to better understand the aging of materials.
Validation of products and materials in cycles or in thermal shock tests
Temperature and humidity have an influence on the life of a material or product. The choice of suitable materials is essential according to the environmental conditions of your products.
Performing cycle or thermal shock tests makes it possible to qualify or control the evolution of parts under conditions adapted to your specifications or according to existing standards.
At the end of this test, which can be carried out by controlling temperature and humidity, it is possible to observe the evolution of an assembly or a subassembly in order to:
- Determine areas sensitive to aging,
- Check the effectiveness of a protective paint,
- Qualify the performance of a container,
- Compare the performance of parts from different suppliers,
- Evaluate the evolution of colorimetry and/or shine, etc.
The 6NAPSE Group supports you in carrying out climatic tests according to your specific specifications or the standards in force in order to better understand and control the aging of your materials.
Our chambers for climatic tests
CLIMATIC CHAMBER
HOT – COLD – HUMIDITY
CLIMATE THERMAL SHOCK CHAMBER
XENON/UV LIGHT ACCELERATED AGING CHAMBER
UV ACCELERATED AGING CHAMBER
Technical information on our climate chambers:
- Temperature range: -70°C to +200°C
- Relative humidity control
- 1m3 tank available for Hot/cold/wet tests
- Solar/UV aging:
- Simulation of the solar spectrum by XENON lamps, in broad daylight, through window glass
- Exposure only to UV: UVA, UVB…
- Example of standards followed: ISO 4892-2, 4892-3, 16474-2 and 16474-3, ASTM D 904, D 2565, G 155, etc.
The tests implemented are varied to meet your needs: poultice, filiform corrosion, thermal shock, solar/UV ageing, etc.
The cycling enclosures at will allow us to work according to customer standards, DO-160, MIL-STD, ISO, ASTM,…
Contact us to discuss your needs quickly and technically!